Electrical Engineer, Mechanical Engineer, Civil Engineer, E & I Engineer, Design Engineer

 

Send your CV at Email: info@ tayyebenterprises.com.pk

for further detail contact to Mr. Zeeshan Liaquat Hussain (HR Admin) Contact # 0092-345-6020062 begin_of_the_skype_highlighting 0092-345-6020062 end_of_the_skype_highlighting

Following Engineers Required in Saudi Arabia Delegation is available Interviews Held on 5th 6th and 7th September 2011

@ Karachi , Islamabad and Lahore.

1. DESIGN MANAGER – ELECTIRCAL
2. DESIGN MANAGER – MECHANICAL
3. DESIGN ENGINEER – ELECTRICAL
4. DESIGN ENGINEER – MECHANICAL
5. DESIGN ELECTRICAL PROTECTION ENGINEER
6. FIRE FIGHTING DESIGN ENGINEER
7. I & C DESIGN ENGINEER
8. HVAC DESIGN ENGINEER

Note: A Female Telephone Cum Computer Operator is Required for our Karachi Office (Inter/Graduate).

ATTN CV Senders.

Humbly Request for to every candidate / CV sender follow the instruction at the time of sending your CV.

Please mention following on top of your CV, and make covering letter inside your CV, if have, do not make separate covering letter

send your CV in word format only.

1. I am a (for example: Electrical Engineer, Mechanical Engineer, Civil Engineer, E & I Engineer, Design Engineer ) etc.....
2. Applied For the Job of:
3. Experienced in Construction / Power Plant etc... ?
4. Name:
5. Age:
6. Date of Birth:
7. Degree:
8. Diploma:
9. Course:
10. Total Experience:
11. Abroad Experience:
12. Passport Number:
13. Expected Salary in Saudi Riyal.
14. Location: (example Karachi / Lahore etc ).

DESIGN MANAGER – ELECTRICAL:

B.Sc in Electrical Engineering, with 10-15 years of relevant experience in the Electrical field, with minimum of 6 years in the capacity of manager. The candidate must have experience to prepare equipment layout for outdoor and indoor substations with voltage levels 400, 230, 132, 33 and 13.8kV, electrical sizing calculations of the substation systems / equipments. Power system studies using software’s like ETAP etc, familiarity to use international standards same as IEC, ANSI, NFPA and IEEE, interpret control and protection drawings for various schemes and develop interface drawings and to produce Relay setting calculations. Well experience in the Design of Power Plants including Gas Turbines / Steam Turbines (e.g. GSU Transformers, switchgears, AC/DC Panels, BOP Systems etc). Conversant with material and equipment selection for the systems related to Power Plants. Possess leadership qualities with ability to work under pressure.

DESIGN MANAGER – MECHANICAL:

B.Sc / BE in Mechanical Engineering, preferably in Thermal Power Sector, with 10 years of relevant experience, with minimum of 6 years in the capacity of Manager. Well experience in the Design of Power Plants including Gas Turbines / Steam Turbines. Conversant with material and equipment selection for the systems related to Power Plants (ex. Fuel Handling system, Piping system, Steam & Water systems, Mechanical Layouts etc.). Familiarity with all applicable international Codes and standards related to Mechanical Design System is a must. Possess leadership qualities with ability to work under pressure.

DESIGN ENGINEER – ELECTRICAL:

B.Sc in Electrical Engineering, with 5 years of relevant experience as Electrical Design Engineer. The candidate must have experience to prepare equipment layout for outdoor and indoor substations – voltage levels (400/132/33/13.8kV). Electrical calculations of the substation systems & LVAC & LVDC equipments, Cables and Bus Ducts (HV, MV and LV), experience in Adequacy calculations such as cable, battery system, transformers, earthing etc, familiarity to use International Standards same as IEC, ANSI, NFPA and IEEE, prepare metering and protection drawings, study schematic drawings and develop cable schedule / interconnection charts. Well experience in the Design of Power Plants including Gas Turbines / Steam Turbines (e.g. GSU Transformers, switchgears, AC/DC Panels, BOP Systems etc). Conversant with material and equipment selection for the systems related to Power Plants. Possess Team work qualities with ability to work under pressure.

DESIGN ENGINEER – MECHANICAL:

B.Sc / BE in Mechanical Engineering, preferably in Thermal Power Sector, with 10 years of relevant experience, as well as experienced in the Design of Power Plants including Gas Turbines, Steam Turbines and Combined cycle. Conversant with material and equipment selection for the systems related to Power Plant (ex. Fuel Handling system, Piping system and sizing calculations, Steam & Water systems, Mechanical Layouts etc.). Familiarity with all applicable International Codes and standard related to Mechanical Design system is a must. Possess Team work qualities with ability to work under pressure.

DESIGN ELECTRICAL PROTECTION ENGINEER:

B.Sc in Electrical Engineering, possessing 10 years in Protection Systems. Capable of performing CTs & VTs sizing calculations for power systems of all voltage levels, able to prepare interlock block logic diagrams, Relay Setting calculations, insulation coordination and other system studies for all power systems of all voltage levels (i.e., from 13.8kV to 400kV). Ability to prepare the Relay Schedule, Metering & Protection Diagrams – Interfacing, cable schedule & interface charts. Check and review Manufacturer’s Drawings. Possess Team work qualities with ability to work under pressure.

Well experience in the Power Plants as well as substations. Conversant with material and equipment selection for the protection systems. Previous experience in testing & commissioning protection scheme will be an advantage.

FIRE FIGHTING DESIGN ENGINEER:

B.Sc in Mechanical Engineering, having 5 years of relevant experience in similar position. Designing and preparing fire fighting systems calculations for the substations and power plants, drawings and technical submittals. Familiar to use software, computerized programming as well as manual calculations. Ensure all the Contract program / specifications requirements are achieved with good quality of work. Reviewing specifications & responding to client requests. Ability to work under pressure.

I & C DESIGN ENGINEER:

B.Sc in Electrical Engineering (I&C), having 5 years of relevant experience in similar position. Designing, preparing and reviewing control circuit drawings, Logic Diagrams, P&ID’s, Input / Output Database and complete technical submittals. Familiar to use and configure a PLC control systems having with DCS & SCADA systems. Fair information about Field Instruments; types, theory of work, limits and calibration. Good knowledge in Communication Criterias and Protocols. Ensure all the Contract program / specifications requirements are achieved with good quality of work. Coordinate all resources required for the execution of the Project. Ability to work under pressure

HVAC DESIGN ENGINEER:

B.Sc in HVAC Engineering, having 5 years of relevant experience in similar position. Designing and preparing thermal load calculations for HVAC, Shop drawings and technical submittal. Familiar to use software, computerized programming (Eliet and Carrier E20) as well as manual. Ensure all the contract program / specifications requirements are achieved with good quality of work. Reviewing specifications and responding to client requests. Reporting to HVAC Chief Engineer. Ability to work under pressure.

Thanks & Regards
Zeeshan Liaquat Hussain
HR Admin Tayyeb Enterprises

Cell # 0092- 345- 6020062 begin_of_the_skype_highlighting 0092- 345- 6020062 end_of_the_skype_highlighting

Direct Ptcl: 0092- 21 -34304740

Office Address:

102, Windsong Place Bldg, A-16, Block-7/8,

K.C.H.S Balouch Colony,Shahra-e-Faisal , Karachi Pakistan

Voice: +92-21-4382016 begin_of_the_skype_highlighting +92-21-4382016 end_of_the_skype_highlighting , 4532155 Fax: +92-21-4546184

URL: www.tayyebenterprises. com.pk

Email: info@tayyebenterprises. com.pk

Online jobs

Free Phone Calls

 Free fone calls worldwide